The KTM Newcastle workshop is the back bone of the business. These are the guys who are responsible for getting your bike back on the track for the weekend, taking care of those last minute tyre changes, offering advice on bike set up from first hand knowledge and most importantly build/pre-delivering your brand new KTM motorcycle.
We service just about any sort of motorcycle and have the parts on hand to make it a quick turn around. We try to keep everyone happy and out enjoying their bikes so if you need any work done please give us plenty of notice by booking in with our workshop manager prior to dropping your bike off.
WORKSHOP PRICE LIST
(as at May 1st, 2019)
2 STROKE = $240.00
4 STROKE = $270.00
MOTOCROSS AND ENDURO
2 STROKE MINOR SERVICE = $240.00
2 STROKE MAJOR SERVICE = $440.00
4 STROKE MINOR SERVICE = $270.00
4 STROKE MAJOR SERVICE = $550.00 - INCLUDING VALVE CHECK & ADJUSTMENT IF REQUIRED OR $730.00 - WITH FUEL FILTER KIT INSTALLED.
VALVE CLEARANCE CHECK & LEAK DOWN TEST = $225.00 - $285.00 PLUS SHIMS
NOTE: VALVE COVER GASKET/S & SPARK PLUG INCLUDED IN PRICE
KTM 200/390 STREET BIKES
MINOR SERVICE = $270.00
MAJOR SERVICE = $825.00 - INCLUDING VALVE CHECK & ADJUSTMENT IF REQUIRED
$915.00 - WITH FUEL FILTER KIT INSTALLED.
KTM 690 MODELS
MINOR SERVICE = $285.00
MAJOR SERVICE = $745.00 OR $915.00 WITH FUEL FILTER KIT INSTALLED.
MINOR SERVICE = $345.00
MAJOR SERVICE = $1,200.00+ (PRICE DEPENDANT ON AIR AND FUEL FILTER REQUIREMENTS)
OFF ROAD V-TWINS
MINOR SERVICE = $405.00
MAJOR SERVICE = $1,260.00+ (PRICE DEPENDANT ON AIR AND FUEL FILTER REQUIREMENTS)
MOST MODELS INC JAP BIKES = $320.00 (AFTERMARKET OIL/DUST SEALS, OIL & LABOUR)
IF BUSHINGS REQUIRED EST. $370.00+ SHOCK SERVICE = $215.00 + PARTS IF REQUIRED.
LOOSE WHEEL FITMENT = $20 FITTING OR $30 - FITTING AND BALANCE
(IF TYRE NOT PURCHASED IN STORE ADD $10.00)
STICK ON WEIGHTS INCLUDED, BALL WHEEL WEIGHTS $10.00 EACH
TYRE FITMENT ON BIKE = $60.00
ALL ROAD/ADVENTURE MODELS = HOURLY RATE, EST $90.00+
TYRE DISPOSAL FEE = $3 UNLESS PURCHASED IN STORE
CHAIN AND SPROCKETS fitment (MX/ENDURO BIKE) = $120.00 + PARTS
SEAT COVER FITTING = $60.00 OR $120.00 IF REMOVAL OF EXISTING COVER IS REQUIRED.
GRAPHICS KIT FITTING = $120 NOTE: RECOMMEND NEW PLASTICS, AFTERMARKET PLASTICS KITS FOR MOST/MAKES/MODELS $250.00
WHEEL RELACING / TURING = $120.00 - $240.00 (1 to 2 hours labour) + parts
CLEANING BIKE PRIOR TO SERVICE WORK = $60.00 - $120.00 NOTE: CLEANING FEE WILL BE ALLOCATED TO JOB IF BIKE DELIVERED TO WORKSHOP IN POOR CONDITION.
ENGINE WORK - MX & ENDURO BIKES
2T TOP END REBUILD = $360.00 + PARTS
2T BOTTOM END REBUILD = $960.00 + PARTS
4T TOP END REBUILD = $600.00 + PARTS
4T BOTTOM END REBUILD = $1,200.00 + PARTS
ALL OTHER BIKES P.O.A
note - all prices are an estimate, inclusive of GST and may vary between models
ENQUIRIESCALL = 02 4037 3310 Direct or 02 4037 3333 for the main shop line.
EMAIL = email@example.com